Nextcloud Client Manual

Versions:

Advanced Usage

Options

You have the option of starting your Nextcloud desktop client with the nextcloud command. The following options are supported:

nextcloud -h or nextcloud --help
Displays all command options.

The other options are:

--logwindow
Opens a window displaying log output.
--logfile <filename>
Write log output to the file specified. To write to stdout, specify - as the filename.
--logdir <name>
Writes each synchronization log output in a new file in the specified directory.
--logexpire <hours>
Removes logs older than the value specified (in hours). This command is used with --logdir.
--logflush
Clears (flushes) the log file after each write action.
--logdebug
Also output debug-level messages in the log (equivalent to setting the env var QT_LOGGING_RULES=”qt.*=true;*.debug=true”).

)

--confdir <dirname>
Uses the specified configuration directory.

Configuration File

The Nextcloud Client reads a configuration file. You can locate this configuration file as follows:

On Linux distributions:
$HOME/.config/Nextcloud/nextcloud.cfg
On Microsoft Windows systems:
%APPDATA%\Nextcloud\nextcloud.cfg
On macOS systems:
$HOME/Library/Preferences/Nextcloud/nextcloud.cfg

The configuration file contains settings using the Microsoft Windows .ini file format. You can overwrite changes using the Nextcloud configuration dialog.

Note

Use caution when making changes to the Nextcloud Client configuration file. Incorrect settings can produce unintended results.

Some interesting values that can be set on the configuration file are:

[Nextcloud] section
Variable Default Meaning
remotePollInterval 30000 Specifies the poll time for the remote repository in milliseconds.
forceSyncInterval 7200000 The duration of no activity after which a synchronization run shall be triggered automatically.
fullLocalDiscoveryInterval 3600000 The interval after which the next synchronization will perform a full local discovery.
notificationRefreshInterval 300000 Specifies the default interval of checking for new server notifications in milliseconds.
[General] section
Variable Default | Meaning
chunkSize 10000000 (10 MB) Specifies the chunk size of uploaded files in bytes. The client will dynamically adjust this size within the maximum and minimum bounds (see below).
maxChunkSize 100000000 (100 MB) Specifies the maximum chunk size of uploaded files in bytes.
minChunkSize 1000000 (1 MB) Specifies the minimum chunk size of uploaded files in bytes.
targetChunkUploadDuration 6000 (1 minute) Target duration in milliseconds for chunk uploads. The client adjusts the chunk size until each chunk upload takes approximately this long. Set to 0 to disable dynamic chunk sizing.
promptDeleteAllFiles true If a UI prompt should ask for confirmation if it was detected that all files and folders were deleted.
timeout 300 The timeout for network connections in seconds.
moveToTrash false If non-locally deleted files should be moved to trash instead of deleting them completely. This option only works on linux
showExperimentalOptions false Whether to show experimental options that are still undergoing testing in the user interface. Turning this on does not enable experimental behavior on its own. It does enable user inferface options that can be used to opt in to experimental features.
[Proxy] section
Variable Default Meaning
host 127.0.0.1 The address of the proxy server.
port 8080 The port were the proxy is listening.
type 2 0 for System Proxy.
1 for SOCKS5 Proxy.
2 for No Proxy.
3 for HTTP(S) Proxy.

Environment Variables

The behavior of the client can also be controlled using environment variables. The value of the environment variables overrides the values in the configuration file.

The environment variables are:

  • OWNCLOUD_CHUNK_SIZE (default: 5242880; 5 MiB) – Specifies the chunk size of uploaded files in bytes. Increasing this value may help with synchronization problems in certain configurations.
  • OWNCLOUD_TIMEOUT (default: 300 s) – The timeout for network connections in seconds.
  • OWNCLOUD_CRITICAL_FREE_SPACE_BYTES (default: 50*1000*1000 bytes) - The minimum disk space needed for operation. A fatal error is raised if less free space is available.
  • OWNCLOUD_FREE_SPACE_BYTES (default: 250*1000*1000 bytes) - Downloads that would reduce the free space below this value are skipped. More information available under the “Low Disk Space” section.
  • OWNCLOUD_MAX_PARALLEL (default: 6) - Maximum number of parallel jobs.
  • OWNCLOUD_BLACKLIST_TIME_MIN (default: 25 s) - Minimum timeout for blacklisted files.
  • OWNCLOUD_BLACKLIST_TIME_MAX (default: 24*60*60 s; one day) - Maximum timeout for blacklisted files.

Nextcloud Command Line Client

The Nextcloud Client packages contain a command line client, nextcloudcmd, that can be used to synchronize Nextcloud files to client machines.

nextcloudcmd performs a single sync run and then exits the synchronization process. In this manner, nextcloudcmd processes the differences between client and server directories and propagates the files to bring both repositories to the same state. Contrary to the GUI-based client, nextcloudcmd does not repeat synchronizations on its own. It also does not monitor for file system changes.

Install nextcloudcmd

CentOS

$ sudo yum -y install epel-release
$ sudo yum -y install nextcloud-client

Ubuntu/Debian

$ sudo add-apt-repository ppa:nextcloud-devs/client
$ sudo apt update
$ sudo apt install nextcloud-client

Refer to the link

To invoke nextcloudcmd, you must provide the local and the remote repository URL using the following command:

nextcloudcmd [OPTIONS...] sourcedir nextcloudurl

where sourcedir is the local directory and nextcloudurl is the server URL.

Other command line switches supported by nextcloudcmd include the following:

--user, -u [user]
Use user as the login name.
--password, -p [password]
Use password as the password.
-n
Use netrc (5) for login.
--non-interactive
Do not prompt for questions.
--silent, --s
Inhibits verbose log output.
--trust
Trust any SSL certificate, including invalid ones.
--httpproxy  http://[user@pass:]<server>:<port>
Uses server as HTTP proxy.
--nonshib
Uses Non Shibboleth WebDAV Authentication
--davpath [path]
Overrides the WebDAV Path with path
--exclude [file]
Exclude list file
--unsyncedfolders [file]
File containing the list of un-synced remote folders (selective sync)
--max-sync-retries [n]
Retries maximum n times (defaults to 3)
-h
Sync hidden files, do not ignore them

Credential Handling

nextcloudcmd requires the user to specify the username and password using the standard URL pattern, e.g.,

$ nextcloudcmd /home/user/my_sync_folder https://carla:secret@server/nextcloud/remote.php/webdav/

To synchronize the Nextcloud directory Music to the local directory media/music, through a proxy listening on port 8080, and on a gateway machine using IP address 192.168.178.1, the command line would be:

$ nextcloudcmd --httpproxy http://192.168.178.1:8080 \
              $HOME/media/music \
              https://server/nextcloud/remote.php/webdav/Music

nextcloudcmd will prompt for the user name and password, unless they have been specified on the command line or -n has been passed.

Exclude List

nextcloudcmd requires access to an exclude list file. It must either be installed along with nextcloudcmd and thus be available in a system location, be placed next to the binary as sync-exclude.lst or be explicitly specified with the --exclude switch.

Example

  • Synchronize a local directory to the specified directory of the nextcloud server
$ nextcloudcmd /home/user/<my_sync_folder> \
https://<username>:<secret>@<server_address>/remote.php/webdav/<Directory_that_has_been_created>

Low Disk Space

When disk space is low the Nextcloud Client will be unable to synchronize all files. This section describes its behavior in a low disk space situation as well as the options that influence it.

  1. Synchronization of a folder aborts entirely if the remaining disk space falls below 50 MB. This threshold can be adjusted with the OWNCLOUD_CRITICAL_FREE_SPACE_BYTES environment variable.
  2. Downloads that would reduce the free disk space below 250 MB will be skipped or aborted. The download will be retried regularly and other synchronization is unaffected. This threshold can be adjusted with the OWNCLOUD_FREE_SPACE_BYTES environment variable.

Follow us on Google Plus! Like our Facebook page! Subscribe to our Twitter channel! Subscribe to our news feed! Subscribe to our newsletter!

All documentation licensed under the Creative Commons Attribution 3.0 Unported license.

See who contributed to our documentation/credits.